Espy Embedded Digital Video Recorder Manuel d'utilisateur télécharger pdf (Page 29)

16 Channel Embedded Digital Video Recorder User Manual 25

Setting Method :

Press the Arrow Keys to select SPOT switching interval(Spot Interval) column, press PTZ key to

pop up the drop -down menu, press the Arrow Keys to select the intervals, then press PTZ key to apply

the selected intervals. The optional numerical value indicates (1/2/3/5 second etc. ), the default value is

2 seconds.

(3) Camera Loss is referred as the skipping of the channel without video signal input.

Setting Method : Press the Arrow keys to select video loss ignoring （Camera Loss） column, then

press PTZ key to pop up the drop-down menu, press the arrow key to select on/off, press PTZ key to

apply the selected settings. If the setting is on, then the channel without video input will be skipped.

While the setting is off, all the channels will be displayed whether any video input or not.

(4) Display Resolution: the resolution setup of VGA or HDMI output port

NOTE: the VGA and HDMI can not output at the same time.

Setting Method : Press the Arrow Keys to select display resolution(Resolution) column, press PTZ key

to pop up the drop -down menu, press the Arrow Keys to select the video output resolution, then press

PTZ key to apply the selected settings.

Picture 4-33

4.7.8 Log Search

Click "Main Menu"→ "Log " to enter the interface as shown in Picture 4-34

Picture 4-34

The login and startup of the device would leave a log message. Users could check the log

information.

1. System Log

The system log indicates: the record of the normal start, local system login, remote login, system

updating.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Pas de commentaire

Espy Embedded Digital Video Recorder Manuel d'utilisateur Page 29